Cordless Driver Drill MAKITA DF332DWYE 12V. (BL MOTOR)

     Cordless Driver Drill MAKITA DF332DWYE  size 10 mm (3/8'') 

           The tool is intended for impact drilling in brick, concrete and stone. It is also suitable for screw driving and drill- ing without impact in wood, metal, ceramic and plastic. 

      Standard Equipment MAKITA  DF332DWYE 

           - Carry case

           - Cordless Driver Drill  MAKITA  DF332DWYE

           - 2 x battery 1.5Ah. 12V. max

           - Battery Charger MAKITA  DC10WD 

           - Warranty and manual

           - 1 screwdriver bit

        Speed change MAKITA  DF332DWYE 

             To change the speed, switch off the tool rst. Select the “2” side for high speed or “1” for low speed but high torque. Be sure that the speed change lever is set to the correct position before operation.
              If the tool speed is coming down extremely during the operation with “2”, slide the lever to the “1” and restart the operation. 

Position of speed change lever  1  Speed  : Low        Torque  : High    Applicable operation   Heavy load- ing operation 

Position of speed change lever  2  Speed  : High       Torque  : Low     Applicable operation   Light loading operation 

    Adjusting the fastening torque  MAKITA  DF332DWYE 

             The fastening torque can be adjusted in 20 steps by turning the adjusting ring. Align the graduations with the arrow on the tool body. You can get the minimum fastening torque at 1 and maximum torque at 20.
             Before actual operation, drive a trial screw into your material or a piece of duplicate material to determine which torque level is required for a particular application. The following shows the rough guide of the relationship between the screw size and graduation. 

     Feature Cordless Driver Drill MAKITA  DF332DWYE 

Cordless Driver Drill MAKITA  DF332DWYE 

             Ultra-compact design and more work amount thanks to the newly developed BL motor and newly developed 12V max slide Li-Ion battery

         - CXT- Compact eXtreme Technology

         - Electric brake 

         - Variable 2-speed (0-450 & 0-1,500 RPM) for a wide range of drilling and fastening applications

         - Variable speed control trigger

         - Convenient 10 mm keyless chuck for quick bit changes

         - Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current

         - Built-in LED light with pre-glow and afterglow functions illuminates the work area

         - Slide style battery and improved ergonomic grip