Automatic water pump MITSUBISHI WP-155R2, power 150 watts

Automatic Water Pump MITSUBISHI WP-155R2 power: 150 W

- High-power motor delivers strong water pressure and durability
- Wiring box protects the wiring set and condenser from water, insects, and rodents, with added peace of mind from a special internal steel casing covering the condenser
- 5-year motor warranty with Thermal Protector to prevent motor burnout under abnormal operating conditions
- Pump head made of copper alloy for durability and rust resistance
- Backflow prevention system with a disc-type check valve moving vertically to ensure a complete seal at all times
- Added ground wire for safety during installation and operation
- Pressure tank coated with a special non-toxic, anti-rust paint both inside and out
- Extra-thick plastic cover made of flame-retardant material, weather-resistant, secured with screws for enhanced strength and safety
- Maximum energy savings with Energy Efficiency Label No. 5 (except WP-505Q5)

Mitsubishi round tank or pressure tank water pump

Another water pump brand that has been popular in Thailand for a long time. Features a large pressure tank structure in yellow with a black base, enclosed with an Aluminum Frame Cooling Fan material that helps prevent animals or insects from getting inside and causing noise. The pump head assembly made of copper alloy is durable and rust-free.  The specially designed tank is welded with Seam Welding technology, withstanding high pressure without leaking, and is coated with special non-toxic paint both inside and outside to provide excellent rust prevention. The tank cover is made of special flame-retardant, strong, and durable plastic.  Proprietary air charger rapidly replenishes air to reduce frequent cycling issues. In addition, it features a backflow prevention system and a tank pressure control system, operating automatically based on the opening and closing of water taps. Equipped with a special ceramic seal gasket that is extra thick and durable. Enhanced safety with a ground wire ensures safety during installation and operation. Certified to ISO standards.

 Which type of round tank water pump is suitable for how many stories of a house?

Suitable for general houses with few taps in use that require high delivery pressure 
How many watts of water pump should be used?
1-story house: wattage from 100-200 W should be used
2-story house: wattage from 250-300 W should be used
For a 3-4 story house, dormitory, or commercial building, a wattage of 300 watts or higher should be used.
However, some houses still experience insufficient water pressure despite purchasing according to the recommended wattage for each story. This might be because the house has many rooms or family members requiring higher-than-normal water usage. Therefore, in addition to calculating the wattage based on the number of stories, the actual water consumption in the household must also be taken into account.

Maintenance tips for long-lasting water pump use

1. Observe pump operation, such as whether water pressure flows strong and normally, whether the sound is normal, and whether the pump cuts in and out properly.
2. You should open the cover to check the interior for any leaks.
3. Prevent any leaks inside the house. If leaks are left unattended for a long time, the water pump will work harder and more frequently, overloading the motor unnecessarily and increasing electricity costs.
4. Always close the faucet completely right after use.
5. Check the cleanliness of the water in the water tank to prevent debris, dirt, and sand from entering the pump.

Basic troubleshooting for common issues with Mitsubishi round tank water pumps

1. Mitsubishi round tank pump frequently turns on and off
Assume first that it might be caused by a leak at the water pump or in the household piping system. The check is simple: just close the outlet valve and observe whether the pump still operates. If the frequent cycling stops → this indicates a leak inside the house. But if it persists, it indicates a leak at the pump itself, which may be caused by a worn mechanical seal or a leaking, deteriorated pressure tank. 

2. Mitsubishi round tank pump does not work
First, check what type of failure it is: power is connected and there is a humming sound but the motor doesn't rotate, or it is completely silent.

3. Mitsubishi water pump does not work, power is on with a humming sound, but the motor does not rotate 
1. It may be caused by a deteriorated, shorted, or burned capacitor. To check, turn off the circuit breaker, remove the machine cover using a Phillips screwdriver to unscrew the cover, then open the condenser/capacitor cover. Then inspect the capacitor (the small black rectangular unit) to see if it is swollen or burned. If abnormal, take it as a sample or check its microfarad (uF) rating and visit a water pump spare parts shop to buy a replacement by splicing the wires. 
2. Caused by damaged bearings or a jammed impeller. To check, turn off the breaker, use a flathead screwdriver to turn the shaft at the rear end of the motor to see if it rotates normally, or remove the motor cooling fan cover and rotate the fan by hand to see if it turns smoothly. If not, it could be caused by damaged bearings that are rusted out or foreign objects trapped inside the impeller.

4. Mitsubishi water pump does not work, does not turn on, and is completely silent; this may be due to no power coming in.
This can be caused by a broken power cord or a faulty pressure switch. To check, verify whether power is reaching the water pump by removing the machine cover, followed by opening the motor capacitor cover. Then use a test light screwdriver to check. If power is normal, it could be a faulty pressure switch. To check: turn off the breaker, open the pressure switch cover with a Phillips screwdriver, and check if the switch is stuck. Fix it by replacing with a new pressure switch.

5. Mitsubishi water pump does not work due to excessive temperature
Current models have an automatic cut-off system to prevent motor burnout. The solution: stop using the water pump, turn off the breaker, wait for the motor to cool down, and then turn it back on.

Mitsubishi round tank water pump makes abnormal noise. Usually, abnormal noises stem from several causes, but most commonly: 

1. The cooling fan is deteriorated, cracked, broken, or has insects inside causing abnormal noise. Solution: Use tools such as a Phillips screwdriver and snap ring pliers. Use the screwdriver to remove the fan cover screws, use the pliers to remove the retaining snap ring, pull out the old fan, insert the new fan, and reassemble as before. 
2. Small stones, sediment, or gravel have slipped into the water impeller. Solution: Use a socket or size 8 T-wrench to loosen the screws and open the impeller cover, being careful not to tear or damage the front pump gasket, then clean out all foreign objects and reassemble as before. 
3. Damaged or worn bearings. Symptoms: continuous loud noise throughout operation.  This may be caused by rust resulting from a worn shaft seal that allowed water into the bearing, or bearings cracked from prolonged service life. The solution must be handled by a skilled technician; it is recommended to contact a nearby technician to inspect it.

How to install a Mitsubishi round-tank water pump

Water pump installation equipment
1. PVC pipe cutter or saw
2. No. 13 wrench 
3. Pipe wrench
4. PVC glue or solvent cement
5. Ball valve
6. Check valve
7. Tee connector
8. Elbow connector 
9. Male straight connector 
10. Straight connector
11. PVC pipe 
12. Thread seal tape

The water pump should be installed as a dual system (2-way system).

- Prepare the area for placing the water tank and the pump; there should be a roof to protect against sun and rain for a longer service life.
- Place the water pump as close to the water tank as possible for maximum efficiency.
- Connect the pipe from the water meter by turning off the meter's water valve first, then connecting with a tee fitting to divert water to the tank and directly into the house.
- Run the pipe into the water tank, installing 1 ball valve to shut off the water for maintenance, and properly install the float valve inside the water tank.
- Screw straight threaded adapters into the tank's water outlet and the pump, wrapping Teflon tape clockwise around the threads about 10–15 turns. 
- Connect the pipe to the ball valve properly, then install the pipe line from the water tank to the water pump, with the ball valve positioned between the water tank and the water pump.
- Then connect the water outlet pipe with another ball valve, followed by a tee fitting connecting to the house and the municipal water supply
- Run a pipe from the meter and tank tee to connect to the tee in front of the water pump, with 1 check valve installed in between to prevent backflow when water is drawn from the water pump. 
- Connect the electrical wiring to the water pump while keeping the circuit breaker off.
- Open the water valve at the meter and the tank inlet, then wait until the water tank is full.
- Open the valve from the water tank to the pump while keeping the outlet valve closed.
- Turn on the water pump's circuit breaker, then wait for the pump to run briefly and stop. 
- Open the outlet valve to the house, then check pump operation by opening and closing faucets inside the house. The installation is now complete.

- Prepare the area for placing the water tank and the pump; there should be a roof to protect from sun and rain for a longer service life.

- Prepare the area for placing the water tank and the pump; there should be a roof to protect from sun and rain for a longer service life.

- Place the water pump as close to the water tank as possible for maximum efficiency.

- Connect the pipe from the water meter by turning off the meter's water valve first, then connecting with a tee fitting to divert water to the tank and directly into the house.

- Connect the pipe from the water meter by turning off the meter's water valve first, then connecting with a tee fitting to divert water to the tank and directly into the house.

- Run the pipe into the water tank, installing 1 ball valve to shut off the water during maintenance, and properly connect the float valve inside the water tank.

- Use straight adapters to screw into the water tank outlet and the pump, wrapping thread seal tape clockwise about 10-15 turns. 

- Use straight adapters to screw into the water tank outlet and the pump, wrapping thread seal tape clockwise about 10-15 turns. 

- Then connect the outlet pipe with another 1 ball valve, followed by a tee fitting connecting to the house and the main water supply.

- Open the valve from the water tank to the pump while keeping the outlet valve closed.