MITSUBISHI EP-255R2 constant pressure automatic water pump, pipe size 1x1 inch, power 250 watts

Constant Pressure Automatic Water Pump MITSUBISHI EP-255R2 Pipe size 1x1 inch, Power 250 W
This water pump model is one of Mitsubishi's most popular pumps, using a high-quality 250W motor that delivers strong and consistent water flow. The unit is compact and utilizes technology for quieter operation, making it ideal for residential installations. In addition, it features a Thermal Protector for motor safety, and a pressure tank made of special materials that requires no gas refilling.

Features
- Motor: 250 Watt motor with built-in Thermal Protector
- Pressure Tank: Pressure Tank design, no gas refill needed
- Impeller: Made of brass, corrosion resistant
- Safety: Built-in Thermistor system helps prevent motor burnout
- Design: Compact design with quiet operation

Applications
- Residential: Suitable for boosting water pressure in medium-sized homes, such as townhouses or detached houses
- Gardens & Small Agriculture: Ideal for watering plants in gardens or small agricultural areas
- General Use: For pumping water from storage tanks for household use

Constant pressure automatic water pump or square tank water pump
Featuring an operating principle with a nitrogen pressure tank, it generates pressure immediately whenever water is turned on without waiting for water pressure in the pipe to drop to a certain level, providing consistent water pressure during use and delivering equal water pressure to every tap. Mitsubishi's constant pressure automatic water pump has been extremely popular for years, especially in Thailand. It has a compact square shape in yellow and black, and features continuous innovations such as the newly redesigned U-shaped impeller—patented exclusively by Mitsubishi Electric—which increases water discharge surface area and reduces resistance, delivering higher water volume with a continuous, powerful stream. The aluminum frame motor comes with a 5-year warranty and a thermal protector to prevent motor burnout, ensuring a long service life. It uses non-flammable materials for superior safety and environmental friendliness under RoHS standards. 
- Double Safety: Protects wiring and condenser from water and insects, with a wiring junction box shielded by an extra steel cover layer made of flame-retardant material. 
- Thermo protector: Shuts down operation when the temperature is too high
- Sus-joint and Housing: Added locking system connecting the suction pipe to the housing to prevent movement, ensuring quality and eliminating leakage issues. 
- Flow Switch electronic circuit board accurately monitors water consumption, coated with waterproof resin, housed in a flame-retardant plastic box with an additional steel enclosure for extra safety. Nitrogen tank ensures steady, uninterrupted power, certified with energy-saving Label No. 5 up to 3 stars.

What type of house is the Mitsubishi square tank water pump suitable for?
Suitable for general houses and commercial buildings with water fixtures requiring constant pressure, such as water heaters and rain showers. Compact, space-saving design. What wattage water pump should you use?
First, you should know the water usage points and the number of residents in the house—how many water points are needed or how many people will use water. If multiple points are used simultaneously, the pressure might not be sufficient.

Generally, the guidelines for selecting a water pump are as follows: 
1-2 storey house, 2-3 residents: use a 100-150 watt water pump
2-storey house, 4-5 residents: should use a water pump of 200 watts or more 
3-4 storey house or commercial building, 6 or more residents: should use a 300 watt or higher water pump. However, keep in mind that higher wattage consumes more electricity, so choose appropriately. Alternatively, you might opt for a pump with an advanced automatic system that controls water delivery electronically; this saves power even at high usage levels, though the price of such pumps is also relatively high.

Basic troubleshooting for abnormal issues in square-tank water pumps 
1. Mitsubishi square tank water pump making unusual noise: Most often, abnormal noises occur due to several causes.
- The cooling fan is deteriorated, cracked, or broken, or insects got inside causing unusual noises. Solution: Use a Phillips screwdriver and snap ring pliers. Unscrew the fan cover using the Phillips screwdriver, use the snap ring pliers to remove the retaining ring on the fan, pull the old fan out, insert the new fan, and reassemble as before. 
- Stones, sediment, or gravel slipped inside the water impeller. Solution: Use an 8 mm socket wrench or T-handle socket wrench to unscrew and open the impeller cover, taking care not to tear or damage the front pump gasket, then thoroughly clean and remove all foreign objects and reassemble as before. 
- Bearings are damaged or deteriorated. Symptoms include continuous loud noise during operation. This could be caused by rust from a deteriorated shaft seal allowing water into the bearing, or bearing failure due to wear and tear. Solution: Must be performed by a professional technician; it is recommended to contact a nearby technician for an inspection. 

2. Mitsubishi constant-pressure square-tank water pump does not run
A water pump not operating can also stem from several causes, but the most common ones encountered are as follows:
- The Mitsubishi water pump does not run due to excessive temperature: current pump models feature a thermal cut-off system to prevent the motor from burning out. Solution: Stop operating the water pump, switch off the circuit breaker, wait for the motor to cool down, and then turn it back on.
- The Mitsubishi water pump does not run due to a stuck or deteriorated pressure switch. Solution: Switch off the circuit breaker, use a Phillips screwdriver to open the cover and remove the pressure switch, then press it to check if it functions normally, or it may need to be replaced with a new pressure switch. 
- The Mitsubishi water pump does not run due to a lack of power supply, which may be caused by a broken power cord or no power from the source at all. How to check: Use a test pen to check at the circuit breaker, or remove the machine cover and the condenser cover using a Phillips screwdriver, then use a test pen to check for electric current. 
- The Mitsubishi water pump does not run due to a damaged or degraded condenser/capacitor. Solution: Turn off the circuit breaker, remove the machine cover and capacitor cover, and inspect the capacitor for swelling or short-circuiting; resolve the issue by replacing it with a new capacitor. 
- The Mitsubishi water pump does not run due to motor damage or short-circuiting, which is quite rare but can happen if the water pump is overloaded or worn out over a long service life. How to check or fix: This may require technical expertise; it is recommended to call a technician for inspection. 

3. Mitsubishi water pump surges/cycles intermittently
The water pump surges or cycles on and off rapidly, which may be caused by a water leak at the pump or within the household plumbing system. How to check: Close the outlet water valve and observe whether the surging stops. If it stops, this indicates a leak in the home's plumbing system, such as a dripping tap or a faucet that is not completely closed. If the surging does not stop after closing the outlet valve, it may be caused by a leak at the pump itself, such as a cracked body/casing, or deteriorated shaft seals or pump face seals; resolve according to the specific issue by replacing the damaged parts. 

Water Pump Maintenance Guide 
1. Observe the operation of the water pump, such as whether the water pressure is normal, the sound is normal, and the pump switches on and off properly.
2. Open the cover periodically to check inside for any leaks.
3. Prevent any water leaks inside the house; leaving leaks unattended for a long time will cause the pump to work harder and more frequently, overloading the motor unnecessarily and increasing electricity costs.
4. Always close the faucet completely immediately after using water.
5. Check the cleanliness of the water in the storage tank to prevent rocks, dirt, and sand from entering the pump.
6. Build a roof to shield it from sun and rain for a longer service life.