Overload CHINT NXR-38 80gG current range 30-38A

Overload CHINT NXR-38 80gG current range 30-38A 
 Suitable as a protective device for AC electric motors against damage caused by 3-phase abnormalities where the current flowing into the motor is between 30 and 38 Amperes, preventing damage from overload or phase-loss conditions. This ensures a longer motor lifespan and enhances electrical system safety. Complete short-circuit protection ensures motor safety and long service life.

Specifications
- Maximum rated operational voltage up to 690 V
- Certified to IEC/EN 60947-4-1, IEC/EN 60947-5-1 standards
- Adjustable current setting
- Operating temperature: -35℃~+70℃
- Used in combination with an 80 Amp gG-type fuse in the main circuit before reaching the overload relay and the motor
- Test button: "Test" button for checking the operation of the relay and contacts
- Stop button: "Stop" button for stopping the motor in the control circuit
- Manual and automatic reset buttons (NXR-200 and NXR-630 only have manual reset)
- Mounting methods: Plug-in to contactor (NXR-12, 25, 38, 100) or independent mounting (NXR-200, 630)
- Pollution degree: 3
- Ingress protection rating: IP20 (NXR-12, 25, 38, 100)

Main Protection
- Overload Protection for motors
  Trips the circuit when the current flowing to the motor exceeds the set value (30 - 38 Amps)
- Phase Loss Protection for motors
  The relay detects and trips the circuit if a phase failure occurs in any phase of the power supply