SEALAND CN40-200 AT Centrifugal water pump (flange) size 2.1-2 x 1.1-2 inches 10HP, 7.5 kW, 380 volts

SEALAND CN40-200 AT Centrifugal water pump (flange) size 2.1/2 x 1.1/2inches 10HP / 7.5 kW / 380 volts
The equipment is a Sealand flanged centrifugal pump, model CN40-200 AT. The pump housing and motor mount are manufactured from G20 cast iron with an anti-corrosion coating. The structure is strong and durable. The controlled motor is a closed squirrel cage type asynchronous. With external ventilation system IP 54 protection class and IP 54 terminal board protection. The pump is suitable for pumping water in homes, condos, residences, agriculture, industry, factories. It should be used to pump clean, non-corrosive liquids.

Features
- Suitable for pumping water in homes, condos, residences, agriculture, industry, factories, irrigation.
- The control motor is a closed squirrel cage type asynchronous. With external ventilation system
- Pump housing and motor mount made from G20 cast iron with anti-corrosion coating.
- Suction flange with center flange Made of G20 cast iron with anti-corrosion coating.
- G20 cast iron impeller with Cataphoresis treatment.
- Threaded counter flange. Galvanized steel with EPDM gasket
- Stainless steel pump shaft Aisi 304
- IP 54 protection class and IP 54 terminal board protection.
- Used to pump clean liquids that does not contain corrosive substances
- Structure design is strong and durable.
- The machine is sealed with carbon ceramic.
- Water volume 50-950 liters/minute.
- High water delivery distance 53.2-18.5 meters
- Maximum flow rate 240 cubic meters/hour.
- Motor power 10 horsepower
- Suction pipe and delivery pipe size 2.1/2 x 1.1/2 inches.
- The temperature of liquids for household use does not exceed 35 °C (CEI EN 60335-2-41).
- Temperature for other uses does not exceed 90 °C.
- Ambient temperature must not be higher than 40 °C.
- Compact size, saves installation space.
- Passes DIN 24255 (UNI EN 733) standard.
- Class of insulation : F
- Made in Italy