SEALAND BK1003 T Centrifugal water pump, 2 impellers 2x1-1/2 inches, 380 volts

SEALAND BK1003 T Centrifugal water pump, 2 impellers 2x1-1/2 inches, 380 volts
The equipment is a Sealand closed impeller centrifugal pump, model BK1003 T. The pump housing and motor mount are made from G20 cast iron with an anti-corrosion coating. The structure is strong and durable. The controlled motor is a closed squirrel cage type asynchronous. With external ventilation system, there is always open protection for the motor and capacitors. (single phase model) has IP 44 protection class and IP 54 terminal board protection. The water pump is suitable for pumping water in houses, condos, residences, agriculture, industry, factories. It should be used to pump liquids that Clean and free of corrosive substances

Features
- Suitable for pumping water in homes, condos, residences, agriculture, industry, factories.
- The control motor is a closed squirrel cage type asynchronous. With external ventilation system
- Pump housing and motor mount made from G20 cast iron with anti-corrosion coating.
- Suction flange with center flange Made of G20 cast iron with anti-corrosion coating.
- The water pump has 2 impellers (brass impeller UNI- EN 12165 / stainless steel pump shaft Aisi 304).
- Protection class IP 44 and terminal board protection IP 54.
- Motor and capacitor protection is always on. (single phase model)
- Used to pump clean liquids No corrosive substances
- The structure is strong and durable.
- The machine is sealed with carbon ceramic.
- Maximum water volume 100-500 liters/minute.
- Water delivery distance is 86.5-25 meters high.
- Flow rates up to 30 m3/hr.
- Motor power 10 horsepower
- Suction pipe and delivery pipe size 2 x 1.1/2 inches
- The temperature of liquids for household use does not exceed 35 °C (CEI EN 60335-2-41).
- Temperature for other uses does not exceed 90 °C.
- Ambient temperature must not be higher than 40 °C.
- Insulation level: F
- Made in Italy