ANEST IWATA WIDER1 Spray gun Suction Feed (paint can not included)

ANEST IWATA WIDER1 Spray gun Suction Feed (paint can not included)

Features
- Ergonomic design to focus on work during ergonomic design. We've also reduced weight by 5 grams. Every knob has deeper grooves. Helps to fit comfortably in the hand for finer adjustments. We also created a bushing on the back of the needle valve spring to make adjustments smoother. The tip of the trigger has a smoother shape. For easier use when using lower amounts of paint.
- Easier maintenance The new WIDER is designed for easier maintenance. We changed the cap thread pitch from 1.0 mm to 1.5 mm to allow for 1.5 turns of tightening, more than half the original amount. Additionally, the back of the needle valve has been redesigned to make it easier to remove and attach. easier Adding a threadless part directly to the air and nipple makes it easier for us to attach the connector.
- The previous pattern set reached approximately 45% of the full pattern width in 1 cycle, approximately 80% with 1.5 cycles, and nearly 100% or nearly fully opened in 2 cycles. Our new improvements are now approximately 35% for 1 turn, approximately 50% for 1.5 turns, and approximately 70% for 2 turns. This linear response to adjustment is more intuitive to use.
- More consistent installation. Previous air valve seat kits consisted of large and small air chambers in the air chamber. Therefore, installing it in place may cause differences in air volume due to the position of the opening. This difference can affect the resulting color and pattern width. We've improved the design for the new WIDER, making the mouth larger and more uniform. So that the installation of the set air valve seats produces more repeatable results. That helps make use more consistent.
- For small to medium sized jobs.
- Suitable for wood, furniture, steel and plastic. For medium viscosity paints and automotive paints (check-on).
- Suction paint spray gun model