HOME / WATER PUMP AND HIGH PRESSURE / Water Pumps / Submersible Pump /

MITSUBISHI SSP255SA.15-40 submersible pump

Name: MITSUBISHI SSP255SA.15-40 submersible pump
Brand: MITSUBISHI
SKU: 13-SSP255SA1540
Price: 5210.00 THB
Availability: InStock

Brand : MITSUBISHI

MITSUBISHI SSP255SA.15-40 submersible pump

MITSUBISHI SSP255SA.15-40 submersible pump - 1

13-SSP255SA1540

5,210 Baht

SKU 13-SSP255SA1540 ⧉

MADE IN THAILAND

~ Installment 566 Baht / month × 10

In stock

Out of stock

Price 5,210 Baht
(VAT included)

Weight : 7.0 kg

Buy via

Reserve via

Ask about restock or get notified via LINE

EAN
Brand country: Japan
Weight: 7.0 kg
Made in: THAILAND

MITSUBISHI SSP255SA.15-40 submersible pump

MADE IN THAILAND

Ships in 1-3 days
Same Day · Bangkok area
Installment ~566 THB/mo

SKU 13-SSP255SA1540
Estimated Delivery 1-3 days to ThailandShips
Shipping Rate calculated
Returns product within 7 days
Cash on delivery

Trust Site 100% safe and secure
- You can request a refund immediately.
- Request a refund if the product is not as specified.
- Products sent with track and warranty for every piece

Price {{xAttr.product_price | number : fractionSize }} THB

Customers Also Viewed

MITSUBISHI CSP-1505TA SUBMERSIBLE PUMP 3 inch

13,160 THB

MITSUBISHI CSP-255S SUBMERSIBLE PUMP 1-1/2 inch

6,410 THB

MITSUBISHI CSP- 405S SUBMERSIBLE PUMP 2 inch

6,780 THB

MITSUBISHI sludge pump model CSP-405SA with 2-inch float

7,750 THB

MITSUBISHI CSP-255SA mud pump with float, size 1-1/2 inches, 220V

7,320 THB

MITSUBISHI CP-255R2 Non-Automatic Water Pump 250W

6,140 THB

Specifications
Discharge Outlet Size	1.5 in
Power	220 V
Motor Power	1/3 HP 250w.
Max. Head	9.5 m
Water Flow Rate	190 L/min

Submersible Pump MITSUBISHI Model SSP405S

Submersible Pump Mitsubishi EnerForce Submersible Pump
Model. SSP255SA.15-40 pipe size 1.5 inches

before use

After receiving the product Please proceed as follows.

1. to move Lift the pump handle (top of the head cover). Do not pull on the cable. If using the pump in deep wells or pits, slacken.

Pump with a string or chain tied to the handle being careful not to strain the cable too much.

Don't move by throwing. Avoid hitting the pump against any solid objects as this can cause the pump to break.

2. Check the general condition of the pump. To ensure that the pump is in working condition and without damage due to transportation.

3. Check if the cable is in good condition. Ground and electrical circuit work fine.

Inspection and maintenance and oil change

1. Lay the pump down. with the side that has the Oil Plug on top, unscrew the Oil Plug, pour the oil into a container. then observe the nature of

oil

2. If it is found that the oil is unusually cloudy or contains water Replace the mechanical seal immediately.

3. Add new lubricant. By selecting the correct type and quantity as specified below.

4. Screw the Oil Pug back to the original position by using a torque of 1/-20 kgf.cm to prevent oil leakage and prevent water from entering.

. Inspection and maintenance after use

1. Clean the pump housing and filter by removing any mud, dirt, rocks, sand, or other debris.

2. Check the rotation of the impeller and remove any obstructions.

3. After checking, clean the outside of the pump with clean water.

Product details

- Used to drain water in confined areas such as basements, garages, wells or other water sources.
- Use to drain water from swimming pools, water tanks, fish ponds or fish tanks.
- Used to supply water For watering plants or making a fountain
- Used for general household tasks such as car washing, draining
(from washing machine or dishwasher)