Grinding machine MAKITA model 9556HNG size 4 inches (side switch)

Grinding machine MAKITA model 9556HNG size 4 inches (side switch)

     Grinder Or another name that general technicians like to call each other, is a piglet. It is another multi-purpose tool that can perform a variety of tasks such as grinding, polishing, cutting, decorating workpieces, which are materials such as wood, steel, concrete, cement, tile, flat sheet and Many other things, just change the leaf to match the job and material needed. And there is also a long neck version.

- Straight neck, designed to be suitable for grinding and polishing work, helping to decorate the workpiece easily. Better grip
- Size 100 mm. (4'') power 840 W.
- Made for grinding deburring Cutting of various metals and construction stones without water
- absorb vibration
- Decreased vibration on the user
- The structure of the special welding system

power supply

- The instrument should be connected to a power supply with the voltage specified on the instrument's information label. and must use only one phase AC power.
- This device is double insulated and can be used with ungrounded plugs.

work

- No tool pressure required The weight of the tool already has enough pressure. Forcing too much pressure on the tool can damage the grinding wheel.
- Always replace the grinding wheel if the tool falls to the ground while grinding.
- Do not hit or hit the disc or grinding wheel while working.
- Do not use tools with hacksaw blades and other saw blades, as the use of such saw blades often bounces back often, causing injury.
- Avoid bouncing or hooking of the grinding wheel especially when working with corners. sharp edges, etc.

Grinding and deburring

- Must hold the grinder firmly every time in use. by allowing one hand to hold the cover of the machine and the other hand gripped the side handle
- Turn on the grinder and use the disc or grinding wheel to work on the workpiece. In general, position them between the edges of the plate.
- or a blade for grinding the surface of the workpiece at an angle of about 15 degrees

care

- Tools and tool vents must be kept clean on a regular basis.
- Clean the tool vents regularly or the vents become clogged.
- Remove the dust cover from the air inlet. and clean for good air circulation