Cordless, thick metal hole puncher MAKITA DPP200ZK 18V (solo)

Cordless, thick metal hole puncher MAKITA DPP200ZK 18V (solo)

     The DPP200 drill can drill round holes in steel and stainless steel without sparks or loose debris. This perforator can drill steel up to 8 mm thick and stainless steel up to 6 mm thick. In addition, the DPP200 can be set to a maximum depth of 40 mm from the workpiece edge using a stopper.

     The DPP200 is a cordless hole puncher that is powered by an 18V LXT Li-ion battery and is capable of drilling holes up to 20 mm in diameter through up to 8 mm thick steel plates. safe too depending on the selected seal Can drill round or oval holes.

- Cordless drill powered by Li-Ion LXT 18V battery.
- Automatic Punch Return : At the end of the punching cycle, hydraulic pressure withdraws the punch from the workpiece. It will automatically return to the starting position and return to the starting position. for continuous drilling efficiency
- also has a lever to return the punch to its starting position. when blocked or when holes cannot be completed.
- The DPP200 comes standard with a 13 mm punch and die, other punches and dies can be selected.
- Possibility to make holes up to 20 mm in diameter
- No sparks or chips
- Suitable for drilling steel up to 8 mm thick and stainless steel up to 6 mm thick, either round or oval.
- Comes standard with a 13 mm punch and die.
- Drill options are available for round holes from 6 to 20 mm.
- Available in drilling options for hole lengths from 6.5 x 10 mm to 14 x 21 mm.
- The head of the machine can be rotated 360° for optimal accessibility.
- The engine rotates 90° left and right, allowing you to set the device to a comfortable position. when working in a place where space is limited
- Quick and easy drilling of holes in 5 seconds
- Throughput when fully charged: 110 holes (approximately)
- Supports LXT 18V batteries with a capacity of 3.0 Ah or higher.
- Hole types can be drilled in both round and rectangular holes, both in steel and stainless steel.

Suitable for: HVAC fabrication, plumbing, electrical, mechanical and many other applications to drill holes in structural beams for anchor bolts, holes in metal brackets for material handling conveyor systems, holes in supports for ceiling suspensions. and other metal fabrication

1 set contains

1 x MAKITA DPP200 Cordless Heavy Duty Metal Hole Puncher
1 x 35cc hydraulic oil
1 x side handle
1 x wrench 8-10
1 x Plastic box
1 x User Manual

**MAKITA battery and charger sold separately**