MAKITA HP0300 electric impact drill, size 10 mm (3/8 inch)

MAKITA HP0300 electric impact drill, size 10 mm (3/8 inch)

     The HP0300 is a 230V impact drill with 3 functions: screw driving, drilling and hammer drilling. The unit is equipped with a variable electric speed control and two mechanical gears for controlled operation. With a lightweight body and a soft, ergonomic grip, the HP0300 is suitable for drilling in 28mm wood and 10mm metal and is equipped with a 10mm keyless chuck and 21 slip clutch positions.

- 320 watt corded impact drill
- all-around machine For medium work, quick access to work mode.
- 20 levels of torque control + 3 functions: drilling, screwing and hammer drilling
- Variable rotation electric speed control with switch trigger allows user to match speed with application.
- 2-speed mechanical gear: high speed mode For fast drilling in light applications, low speed mode for heavy duty applications requiring high torque. for optimal screwdriving
- 2 modes of operation for “rotation only” or “rotation hammering” for various applications
- Strong and durable with hardened steel gear drive
- Reliable 10 mm keyless drill chuck for installation and easy to remove drill bits
- Soft rubber grip Ergonomic design gives more control and reduce fatigue for more convenience in use
- Embedded lock button for continuous use
- The forward/backward rotary switch button is conveniently positioned.
- Externally accessible carbon brushes for easy replacement
- Double insulation
- Power cable 2.5 m.
- Auxiliary hook can be attached.
- Comfortable operation with low weight, compact design with short overall length, total length 235 mm

>>> Caution of MAKITA HP0300 Impact Drill

- There is a significant amount of torque on the tool/end bit immediately when drilling through holes. When debris clogs the hole or when colliding with reinforcing steel in concrete Use the side grip Always hold the tool (auxiliary handle) and hold the tool firmly with the side handle and switch handle during operation. Failure to follow the above steps may cause it to fail. The tool was in control and was severely injured. When drilling concrete, granite, tile, etc., move the operating mode lever to the hammer position. to operate the hammering rotation. Use a tip drill. Position the tungsten carbide drill where the drill is intended to be drilled. Then press the switch to operate. Do not force the tool Applying gentle pressure will give the best results
- Hold the tool in place and prevent the stick from slipping out of the drilled hole. Do not apply more pressure. when there is scrap metal or material clogging the hole Use a tool that is idle instead. Then pull some drill bit out of the hole. Repeating this process several times will clean the hole. and can drill normally

>>> Maintenance of MAKITA Impact Drill HP0300

- Make sure the tool is switched off and unplugged before any inspection or maintenance.
- Do not use gasoline, benzene, thinner, alcohol or similar materials. This may cause discoloration, deformation or cracking.

>>> Cleaning the ventilation holes

Tools and tool vents must always be clean. Clean tool vents regularly or whenever they vent. The air began to block