Electric grinder MAKITA GA4050, size 4 inches (1300W)

Electric grinder MAKITA GA4050, size 4 inches (1300W)

- Powerful 1,300 W motor provides 11,000 RPM for high power output.
- New tool-free wheel covers (sliding rod type) allows for quick and easy angle adjustment and installation/removal of wheel covers.
- Reliable motor and brushes extend the service life.
- Anti-drop handle allows attaching anti-drop straps, etc.
- Easy-to-hold grip handle reduces hand fatigue and provides more control over the machine. Due to the smaller grip circumference of the 9564P and the ergonomic design
- The easy-to-use large paddle switch trigger works properly wherever the user holds the barrel grip.
- Enhanced shaft locking mechanism The gear housing has been redesigned to reduce breakage of the shaft locking mechanism, the large locking pin cover allows normal shaft locking even with thick gloved fingers.
- Reliable machined gears for longer service life
- Side handles can be placed on both sides for operator convenience.
- Wheel covers protect operators from accidental scattering of broken wheels or workpieces with minimal movement of the wheel covers.
- Anti-restart function reduces accidental startup. Even if the tool is plugged into a power source with the ON switch
-Soft starter reduces shock when starting the engine and ensures a smooth start-up of the tool.
- Double insulation
- Suitable for welders, assemblers, bricklayers, maintenance/repair, etc.

     Purpose of use of the MAKITA grinder model GA4050

This tool is intended for grinding, deburring, cutting metal and construction stone. without water

     Power supply of the MAKITA grinder model GA4050

The tool must be connected to a power supply with the voltage specified on the machine information label. and must use only one phase AC power. This appliance is double insulated as stipulated in EU standards. and can be used to plug into an ungrounded electrical outlet

     Working of the MAKITA grinder model GA4050

- No tool pressure required The weight of the machine already has enough pressure. Forcing and applying too much pressure can damage the chia blade.
- Change the chia leaves every time. If the tool falls to the ground while grinding
- Do not hit or hit the disc or grinding wheel while working.
- Avoid bouncing or hooking of the blade, especially when working with corners. Sharp edges, etc., as such events can cause loss of control and rebound.
- Do not use this tool with hacksaw blades and other saw blades. Because if the saw blade is used with a grinder, it tends to bounce back often. and cause loss of control which can cause injury.

     Precautions of the MAKITA Grinder Model GA4050

- Do not switch on the tool when the machine is in contact with the workpiece as this may cause injury to the operator.
- Wear goggles to prevent dust/wind. or face mask every time while working
- After the work is done Always switch off the tool. and wait until the grinding wheel stops spinning completely before putting the tool down.

     Care and maintenance of the MAKITA grinder model GA4050

- Before checking or maintaining the machine Always make sure to turn off the power and unplug the machine.