Cordless Impact Screwdriver Set MAKITA DTD157RFJ 18V

Cordless Impact Screwdriver Set MAKITA DTD157RFJ 18V

- Extreme Techology Lithium-Ion Technology, Brushless Motor
- This tool is used for screwing into wood, metal and plastic, suitable for working in tight spaces.
- Appropriate tightening torque may vary depending on screw/bolt type or size. workpiece material to be tightened, etc.
- Despite internal design changes for strength But the newly designed gear section makes the overall length 2 mm shorter than the DTD155.
- Compact body for easy screwdriving in tight spaces.
- 3 modes of operation for A mode / Hard mode / Soft mode for multiple operations.
The A mode feature eliminates “cam screws” and “cross screws” by driving at low speed until they begin to tighten.
- Compact and lightweight to reduce operator fatigue.
- Ergonomic handle optimized for screwdriving applications.
- The handle is designed to be soft to grip for added comfort.
- LED lights help illuminate the work area
- Xtreme Protection Technology (XPT) is engineered for improved dust and water resistance for working in harsh conditions.
- Convenient 6.35 mm (1/4 inch) hex chuck for quick drill changes
- 18V LXT BL Brushless Wireless A-Mode (Assist Mode) 140 N m (1,240 in.lbs.) Impact Driver
- Anti-wobble bit structure
- Use two ball bearings to hold the anvil firmly to reduce wobble.
- Despite internal design changes for strength But the newly designed gear section makes the overall length 2 mm shorter than the DTD155.
- Compact body for easy screwdriving in tight spaces.
- 3 modes of operation for A mode / Hard mode / Soft mode for multiple operations.
- A mode feature eliminates “cam screws” and “cross screws” by driving at low speed until tightening begins.
- variable speed (0-1,300/0-3,000 RPM & 0-2,000/0-4,100 IPM) for various mounting applications.
- The BL motor is electronically controlled to optimize battery power for longer on a single charge.
- The BL motor eliminates carbon brushes, allowing the BL motor to run cooler and more efficiently for longer service life.
- The BL motor is energy efficient to match torque and RPM to the changing demands of the application.
- Compact and lightweight to reduce operator fatigue.
- Suitable for working in narrow spaces
- Ergonomic handle optimized for screwdriving applications.
- Ergonomic handle with soft grip for added comfort.
- Built-in twin LED lights with pre-glow and afterglow functions illuminate the work area.
- eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for working in harsh conditions.
- Convenient 6.35 mm (1/4 inch) hex chuck for quick drill changes

feature
- tightening torque adjustment
- 2-speed impact driver with electronic speed switch
- Compact size with the use of BLDC - Brushless DC motor
- XPT - Increased resistance to dust and moisture.
- Operation mode "A" - In this mode, the engine starts driving at low speed. It then approaches the hammer and increases the speed until it reaches its maximum speed.
- Ergonomic handle with non-slip rubber coating.
- With 2 built-in LEDs to illuminate the work area with a delayed cutoff function.
- Does not support BL1811G, BL1813G, BL1815G batteries (without electronic devices).

technical data
- Mounting Type: 1/4" HEX (Hexagon)
- Maximum torque: 140 Nm
- Gear 1: 20 Nm
- 2nd gear: 140 Nm
- Idle speed:
- Gear 1: 1300 rpm
- 2nd gear: 3000 rpm
- Impact rate while operating:
- Gear 1: 2000 bpm
- 2nd gear: 4100 bpm

noise and vibration
- Sound pressure level error: 3 dB (A)
- Sound power level error: 3 dB (A)
- Vibration level error: 1.5m/s2
- Sound pressure level: 95 dB (A)
- Sound power level: 106 dB (A)
- Vibration level when tightening bolts and screws in the maximum range: 11.5 m / s2.

The set includes
1 x DTD157 impact driver
1 x Belt clip (346317-0)
2 x LXT 18V 3.0Ah batteries with charge indicator BL1830B
1 x DC18RC fast charger
1 x MAKPAC box