Belt sander with bag MAKITA 9401, size 4 x 24 inches (940W)

Belt sander with bag MAKITA 9401 size 4 x 24 inches (940W)

Belt sander MAKITA The 9401 is the prototype sander in many ways. A generation that has been in the hearts of people for a long time It is also the prototype of the MAKITA M9400B sander. Due to its durability and being manufactured in the original factory in Japan, this sander is It is widely used by professional craftsmen. In addition, the size of 4" x 24" sandpaper is also the easiest to find.

     MAKITA sander What is the primary function of 9401?
Usually a belt sander. It eats wood quite deeply and faster than other species. which is suitable for opening the face For fine sanding again or peeling the coating because of the MAKITA sander The 9401 has a relatively large contact area, so it works very well for large table tops, parquet floors, or any other work with high surfaces that require speed, and is ideal for flat sanding. both in the edge and open areas

     Interesting features
- Size 100 x 610 mm. (4''x24'') Power 940W Made in Japan
- Low noise (100dB) for operator comfort.
- Sealed construction and protects motor and bearings from dust and debris for longer tool life.
- The large front grip is positioned comfortably for the operator.
- Innovative design for close-to-wall sanding with the nose and side of the grinder.
- Powerful 11 ​​AMP motor for high production use.
- The cord is located at the top of the handle for operator convenience.
- 360° rotatable dust bag for more convenient use.
- High performance dust collection system for cleanliness of the working area
- Low center of gravity keeps the machine balanced. easy to work
- Double insulation
- Designed for sanding large surfaces of wood, plastic or metal. including painted surfaces

Ideal for : Heavy-duty construction - ideal for site work, carpentry, carpentry, furniture makers. floor installer deck builder and general contractors who want the best belt sander in its class

     Usage
- To activate the tool, press the trigger switch. Release the actuator switch to stop the operation.
- If you want to use it continuously Press the actuator switch and press the lock button.
- If you want to stop using the tool in the locked position Press the switch to operate all the way. then release the switch

Adjusting the position of the belt
- while the belt is spinning Use the knob on the left side of the machine to adjust the center of the belt position with the base.

     maintenance
- Always make sure the tool is switched off and unplugged before performing any inspection or maintenance.
- Do not use gasoline, benzene, thinner, alcohol or the like. This may cause discoloration, deformation or cracking.

     1 set contains
1 x MAKITA 9403 Sander
1 x Belt Paper Size 4" x 24", 80 Grit
1 x Dust bag
1 x Manual