PUMA HUSH 100 Silent oil free Air Compressor 3HP 100L 750W.x3

PUMA HUSH 100 Silent oil free Air Compressor 3HP 100L 750W.x3
A quiet air pump with a capacity of 100 liters is suitable for manufacturing industries, furniture assembly factories, or even food factories. The larger the air pump, the more variety of air tools can be used. and more pieces as well And with this oil-free air pump, it's a quiet air pump that doesn't make a loud sound. Makes it possible to bring it into the building as well. In most cases, oil free air pumps usually You must suspend use of the device so that it cannot work continuously. Always consider usage before purchasing. If you want to use an air pump that can be used all day, we recommend a belt air pump for this model of quiet air pump. Comes with 3 750 w motor heads, normal rotation speed of 1450 rpm, bright yellow body, pressure gauge has a slight slope. Standard on-off switch. This PUMA HUSH air pump is quieter than the PUMA FORCE but is slower and the valve for draining water from the air tank is a lever that is very convenient to use.

Features
- Suitable for use in general homes, workshops, small-medium industrial work, car repair shops, and inflating car tires.
- Use a water lubrication system. Helps keep the operating sound of the pump quiet.
- Small and compact Easy to carry and move
- Uses an air cooling system.
- Power 750 watts x 3 (3HP)
- Motor speed 1450 rpm.
- Air volume 387 liters/minute
- Air tank size 100 liters
- Pressure 7-8 bar

Maintenance care and precautions
- Clean the external air pump regularly. To observe if there is anything unusual or not, such as The occurrence of oil leaks or dust that will enter the machine. which causes dirt to accumulate
- You should choose to use engine oil for the air compressor. Because if adding other types of lubricating oil into the mix May cause damage to the internal parts of the air pump.
- The engine oil should be changed every 500 hours or when the color of the oil starts to darken.
- You should open the water drain valve under the air tank at least once a week to extend the life of the air tank.
- The air pump should not be installed on a slope. Because it may result in poor heat transfer. and will cause the heat to accumulate in that area to increase. This causes the temperature around the air pump to become too hot.
- You should make sure that every nut is fully tightened, such as the pulley nut. Motor mounting nuts, etc.

Steps for use
1. Check the oil free air compressor to make sure it is in normal condition, ready to use and not damaged. Follow the instruction manual before every use.
2. Wear head protection and safety glasses while using it.
3. Do not touch the motor and piston area of the oil free air compressor while the machine is working.
4. Drain water under the tank every time before and after use to prevent corrosion of the air tank.
5. Clean/replace (if torn) the air filter before using the oil free air pump.
6. Do not modify the oil free air pump or use it incorrectly until it causes damage to the machine.
*Warning: Before starting to maintain the air pump Be sure to turn off the air compressor and unplug the power cord every time*

Things you should check when receiving a free oil pump
- Is it the model that meets your needs or not?
- Check the equipment to see if it is complete or not.
- Was the air pump damaged or bent during transportation?

Where to install the air compressor/oil free air pump
- The place is wide enough to be disassembled and inspected. The oil free air pump should not be placed next to a wall. There should be a distance of about 15 centimeters.
- An appropriate location should be less humid, less dusty, and have areas that are never too much. And it is a place where air can circulate easily.
- There is appropriate lighting to facilitate checking the oil easily.