Rotary Hammer Drill PUMA PM-26DFR 26 mm.

     Rotary Hammer Drill PUMA PM-26DFR 26 mm.

The PUMA rotary hammer model PM-26DFR 3 system with SDS-PLUS chuck can be used with conventional SDS-PLUS drill bits for a wide range of applications. Either drilling or chiseling can do it all. Suitable for light to very heavy work. The set includes 3 free drill bits, 2 chisel bits and 1 steel chuck. It is considered a very worthwhile set. Quality products, long lasting, durable, quality guaranteed from PUMA. Must try!!

     interesting features

- Voltage 220V./50Hz.
- Power 800W.
- Rotation speed 0-1100 rpm
- Impact rate 0-4900 bpm
- Impact rate per stroke 3.0 joules
- Ability to penetrate concrete 26 mm.
- The ability to penetrate steel 13 mm.
- Ability to drill wood 30 mm.

     Removing the drill chuck

Press the locking ring sleeve into position. and pull the rotary chuck or the drill chuck to the front

     Inserting the drill chuck

Before inserting, the flower head should be cleaned. and coated with a thin grease at the end of the chuck Slide the swivel chuck into on the chuck until he heard the sound

     Rotary insertion

Insert the rotary cutter with the rotary chuck. only when power off When using a rotary cutter The tip of the rotary shank must be cleaned first. by applying a thin layer of grease Then insert the rotary bit into the chuck. The chuck will automatically lock.

     maintenance and cleaning

1. The power plug should be pulled out of the socket before adjusting the machine.
2. The machine must be kept and the vents clean at all times.
3. If the dust cover is damaged, it should be replaced immediately from the service center.
4. This rotary hammer has passed the QC thoroughly. If there is a problem Only PUMA rotary hammer parts and accessories should be used.

     1 set contains

1 x PUMA PM-26DFR Rotary Hammer
1 x drill bit 6 mm.
1 x drill bit 8 mm.
1 x drill bit 10 mm.
1 x Pointed Chisel
1 x Chisel, Flat Tip
1 x Metal quick change chuck