Electric Drill BOSCH 16 mm. Model GSB16RE SET

     Impact Drill BOSCH GSB 16 RE

             size 16  mm. power 750 W

     Intended Use  BOSCH GSB 16 RE

              The machine is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. Ma- chines with electronic control and right/left rotation are also suitable for screwdriving and thread-cutting.   

        Maintenance and Cleaning

            - Before any work on the machine itself, pull the mains plug.
            - For safe and proper working, always keep the machine and ventilation slots clean.
            - If the replacement of the supply cord is necessary, this has to be done by Bosch or an authorized Bosch service agent in order to avoid a safety hazard. 

                  Reversing the rotational direction Impact Drill BOSCH GSB 16 RE

                 The rotational direction switch is used to reverse the rotational direction of the machine. However, this is not possible with the On/Off switch actuated. 

                 Right Rotation: For drilling and driving in screws, push the rotational direction switch upward on the left side and at the same time downward on the right side.

                 Left Rotation: For loosening and unscrewing screws and nuts, push the rotational direction switch downward on the left side and at the same time upward on the right side. 

                   Switching On and Off Impact Drill BOSCH GSB 16 RE

                 To start the machine, press the On/Off switch and keep it pressed.
                 To lock the pressed On/Off switch, press the lock-on button.
                 To switch off the machine, release the On/Off switch or when it is locked with the lock-on button, briefly press the On/Off switch and then release it.     

          Working Advice Impact Drill BOSCH GSB 16 RE

                    Apply the power tool to the screw/nut only when it is switched off. Rotating tool inserts can slip off. 
                    After longer periods of working at low speed, allow the machine to cool down by running it for approx. 3 minutes at maximum speed with no load. 

           Impact Drill BOSCH GSB 16 RE

                   We recommend the use of a drill stand (see accessories) for work where greater precision is particularly required.
The machine vice, which is available as an accessory, enables secure clamping of workpieces. This prevents the workpiece from turning and any accidents this would cause. 

     Features Impact Drill BOSCH GSB 16 RE

Double insulation
Speed preselection with setting wheel
Compact ergonomic design for fatigue-free usage
Auxiliary handle with depth stop for better control
Powerful 750 W motor to suit versatile professional needs
Speed trigger with electronic control for exact pilot drilling
Rotating brush plate for constant power in reverse and forward rotation
Robust pot gear housing and clamp shell motor housing for tough jobsite condition