Cordless Hammer Driver Drill MAKITA HP333DZ

         Cordless Hammer Driver Drill MAKITA HP333DWYE

                 size 10mm. (3/8") power 12V.

                    - 2 x battery (Lithium-ion) 12V. MAX 1.5AH

                    - Cordless Hammer Driver Drill suitabl for home and professional user

                   - 18 torque settings

                   - Hammer mode for protect screw damage

                   - MAKITA HP 331 DWYE Mechanical 2 speed gear box

          Features Cordless Hammer Driver Drill MAKITA HP333DWYE

                  - 12V MAX slide type battery platform

                  - CXT - Compact eXtreme Technology

                  - LED joblight

                  - Ergonomically designed handle

                  - Mechanical 2 speed gear box

     Intended use Cordless Impact Driver MAKITA HP333DWYE

          The tool is intended for screw driving in wood, metal and plastic. 

     Switch action Cordless Impact Driver MAKITA HP333DWYE

           To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. 

     Installing or removing driver bit/ drill bit Cordless Impact Driver MAKITA HP333DWYE

            Turn the sleeve counterclockwise to open the chuck jaws. Place the driver bit/drill bit in the chuck as far
as it will go. Turn the sleeve clockwise to tighten the chuck. To remove the driver bit/drill bit, turn the sleeve counterclockwise. 

     Drilling operation Cordless Impact Driver MAKITA HP333DWYE

             First, turn the adjusting ring so that the pointer points to the marking. Then proceed as follows. 

     Drilling in wood Cordless Impact Driver MAKITA HP333DWYE

             When drilling in wood, the best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the drill bit into the workpiece. 

     Drilling in metal Cordless Impact Driver MAKITA HP333DWYE

            To prevent the drill bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled. Place the point of the drill bit in the indentation and start drilling.

            Use a cutting lubricant when drilling metals. The excep- tions are iron and brass which should be drilled dry.