Cordless Hammer Driver Drill MAKITA HP333DWYE 12V.

        Cordless Hammer Driver Drill MAKITA HP333DWYE 12V.

- Cordless screwdriver drill, size 10 mm. (3/8''), power 12 V.
- For professionals, suitable for those who want to use screws, tighten various nuts, drill steel, wood, masonry.
- Torque can be adjusted from 1-20
- There are 3 modes: drilling, screwing, impact, reducing damage to the nut and drilling concrete comfortably.
- 2 speed, adjustable speed slow/fast
- Used for heavy work and has a large amount of work and continuously
- Comes with 2 batteries and a charger, which is considered a really worthwhile set !!

       Interesting Features

- with a compact shape and lightweight, adding great flexibility in work
- There are LED lights to illuminate places where there is insufficient light. Work more conveniently
- Handle design to match the ergonomics of work. easy to control
- The handle is made of special rubber. Effective in reducing fatigue during use

Applications - This tool is used for hammer drilling in brick, concrete and stone and can also be used for screwdriving and drilling in wood, steel, ceramics and plastics. without using shock as well

       Switch operation Cordless Impact Driver MAKITA HP333DWYE

- To activate the tool pull the switch to operate The tool speed increases when the actuation switch is applied. Release the trigger switch to stop working.

       Installing and removing screwdrivers or drill bits Cordless Impact Driver MAKITA HP333DWYE

- Turn the sleeve counterclockwise to open the chuck mouth. Insert a screwdriver or drill bit into the chuck as far as it will go.
- Turn the sleeve clockwise to tighten the chuck. to remove a screwdriver or drill bit turn the casing counterclockwise.

       Drilling of the MAKITA cordless impact screwdriver drill HP333DWYE

First, turn the adjusting ring until the arrow points to the mark. Drill bit, then do the following steps.

Wood Drilling - To get good results when drilling wood. A wood drill should be used in conjunction with a lead screw. The lead screw makes drilling easier by pulling the drill bit into the workpiece.
Drilling in metal - to protect the drill bit from sliding when starting to drill. Make the cuts with a center drill bit and a hammer. at the point of penetration Place the tip of the drill at the cutting notch and start drilling.Use the cutting lubricant when drilling metal. except for drilling steel and brass which should be drilled dry

       1 set contains

1 x MAKITA Cordless Drill Model HP333D
1 x MAKITA DC10WD Battery Charger
2 x Battery 12V. 1.5 Ah
1 x Screwdriver Bit
1 x Battery cover
1 x User Manual, Warranty Card