Brushless Hammer Drill Dewalt DCH333 X2-KR (54V.) XR FLEXVOLT

Brushless Hammer Drill Dewalt DCH333 X2-KR (54V.) XR FLEXVOLT

TECHNICAL SPECIFICATIONS

        BRUSHLESS motor
        2 x battery Li-Ion 9.0Ah
        Charger DCB118 power 18 / 54 V. 
        NO LOAD SPEED 0 - 1000 rpm.
        BLOWS 0- 4480 bpm.
        IMPACT ENERGY 3.5 J.
        WEIGHT 3.7 Kg.

Raw drilling capacity is:

        Max. Drilling Capacity [Concrete]: 30 mm

        Max. Drilling Capacity [Wood]: 30 mm

        Max. Drilling Capacity [Metal]: 13 mm

Safety Instructions  
            - Wear ear protectors. Exposure to noise can cause hearing loss.

           - Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.

           - Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. 

           - Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

           - Wear safety goggles or other eye protection. Hammering operations cause chips to fly. Flying particles can cause permanent eye damage. Wear a dust mask or respirator for applications that generate dust. Ear protection may be required for most applications. 

MAINTENANCE

       Your DeWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous  satisfactory operation depends upon proper tool c are and regular cleaning.

          WARNING

            To reduce the risk of serious personal injury, turn tool off and disconnect battery pack before making any adjustments or removing/ installing attachments/accessories or when making repair. An accidental start-up can cause injury.

         Lubrication 

            Your power tool requires no additional lubrication.

        Cleaning

            Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure 

            Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.