Cordless Impact Wrench MAKITA DTW251RFE

     Cordless Impact Wrench MAKITA DTW251RFE

size 1/2" (12.7 mm.) max torque 230 N.m

     Features Cordless Impact Wrench MAKITA DTW251RFE

          - Includes 2 x 3.0Ah batteries, rapid charger & carry case

          - 4-pole motor with dual steel ball bearings for durable performance

          - Provides 230Nm* max torque

          - Hammer case protects work from scratches, increasing manoeuvrability

          - Single LED Job light with after glow function

     Intended use Cordless Impact Wrench MAKITA DTW251RFE

The tool is intended for fastening bolts and nuts.

     Switch action Cordless Impact Wrench MAKITA DTW251RFE

Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. 

     Lighting up the front lamp Cordless Impact Wrench MAKITA DTW251RFE

Do not look in the light or see the source of light directly.

Pull the switch trigger to light up the lamp. The lamp keeps on lighting while the switch trigger is being pulled. The light automatically goes out 10 - 15 seconds after the switch trigger is released. 

     Reversing switch action Cordless Impact Wrench MAKITA DTW251RFE

This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation.

When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. 

Always check the direction of rotation before operation.

Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool.

When not operating the tool, always set the reversing switch lever to the neutral position. 

     ASSEMBLY Cordless Impact Wrench MAKITA DTW251RFE

Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. 

            Selecting correct socket

Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and inconsistent fastening torque and/or damage to the bolt or nut. 

            Installing or removing socket 

                   1.For socket without O-ring and pin To install the socket, push it onto the anvil of the tool until it locks into place.
                      To remove the socket, simply pull it off.

                  2.For socket with O-ring and pin Move the O-ring out of the groove in the socket and remove the pin from the socket.  
                     Fit the socket onto the anvil of the tool so that the hole in the socket is aligned with the hole in the anvil.
                     Insert the pin through the hole in the socket and anvil. Then return the O-ring to the original position in the socket
                     groove to retain the pin. To remove the socket, follow the installation procedures in reverse. 

     MAINTENANCE 

        Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.

        Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.