Chuck key Drill MAKITA 6412

     Chuck key Drill MAKITA 6412 use with Carbon brush No CB64A

The tool is intended for drilling in wood, metal and plastic,It can use for screw several type, drill concrete and wall.

size 10 mm. (3/8'') power 450 W. 

     Intended use MAKITA 6412

The tool is intended for drilling in wood, metal and plastic

     Power supply MAKITA 6412

The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated and can, therefore, also be used from sockets without earth wire.

     Switch action MAKITA 6412

To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. For continuous operation, pull the switch trigger and then push in the lock button. To stop the tool from the locked position, pull the switch trigger fully, then release it.

     Reversing switch action MAKITA 6412

This tool has a reversing switch to change the direction of rotation. Move the reversing switch lever to

the position (A side) for clockwise rotation or the position (B side) for counterclockwise rotation

     FEATURES Chuck key Drill MAKITA 6412

          - Variable speed control by trigger switch

          - All ball bearing construction

          - Double insulation