HOME / AUTOMOTIVE TOOLS / Battery Charger / Car Battery Charger /

Battery Charger PUMA L-241530

Name: Battery Charger PUMA L-241530
Brand: OTHER BRAND
SKU: 37-030071
Price: 2350.00 THB
Availability: OutOfStock

Brand : OTHER BRAND

37-030071

2,350 Baht

SKU 37-030071 ⧉

In stock

Out of stock

Price 2,350 Baht
(VAT included)

Weight : 5.0 kg

Buy via

Reserve via

Ask about restock or get notified via LINE

EAN
Weight: 5.0 kg

Handle type charger 24/30A, adjustable output voltage 6-12-24 V.
Can charge 1-2 batteries/time, suitable for car batteries, garage or general work.

SKU 37-030071
Estimated Delivery 1-3 days to ThailandShips
Shipping Rate calculated
Returns product within 7 days
Cash on delivery

Trust Site 100% safe and secure
- You can request a refund immediately.
- Request a refund if the product is not as specified.
- Products sent with track and warranty for every piece

Price {{xAttr.product_price | number : fractionSize }} THB

Customers Also Viewed

Straight fitting PU tube lock 8mm x outlet 1/4'' KPS-3006

15 THB

Cutting Edge Saw BNCE-20 cutting edge saw

11,200 THB

Concrete power screed JSV-35-8 Tamper blade 8 ft. TAIKYOKU-JEONIL

65,900 THB

Wood Chipper CPA-450 14 horsepower

248,000 THB

RED STAR 3-Way Air Pressure Regulator 1/2" x 1/8" x 1/4" for 25-50L Direct-Drive Air Compressors #RD-4014

450 THB

SMP-E PU Cable Clamp Three-way Compression 8mm # KPS-3302

90 THB

Battery Charger PUMA L-241530

Install "circuit protector" and switch breaker.

- Prevent damage from Over-current charging/short circuit output/reverse charging The virtual projector button will pop up and cut off the power.
Fix the error before pressing the back button down.
- Power input switch (breaker) to prevent short circuit on the power input side (instead of fuse)

How to charge (charge) the battery

1. Before use, adjust the switch and knob to the front of the machine to OFF.
2. It is not necessary to remove the battery terminals from the car, but must turn off all electrical appliances in the car.
3. Remove the battery cap. to drain the gas during charging
4. Clip the + and - clips to the + and - terminals of the battery to the correct terminals.

***If you pinch the terminal surface, there will be a warning sound. Replace the new pliers so that they are stuck. and observe the circuit protector If it bounces off, you have to press it again.

Otherwise, the output power will be cut off. The unit will not be able to charge***

5. Twist "Voltage adjustment knob" to match the voltage of the battery (1 ball = 6V or 12V ; 2 balls=24V)
6. Plug the power into 220-240 volts and turn the power switch to the ON position.
7. Accelerate the current by twisting "Current adjustment knob", look at the meter needle, do not exceed the requirements for use.
8. When to stop using Turn off the switch to the OFF position and remove the clip from the battery.

feature

- Charging up to 200A
- Can charge both water and dry
- Can charge 2 batteries at the same time
- 8 steps speed adjustable
- There are plugs DC12V. and DC24V. for connecting to DC electrical devices.
- There are circuit breakers and fuses to prevent overcurrent or leakage.
- There is a green light to warn when charging.
- There is a meter to see the current while charging the battery.
- There is a warning sound when the clamp is wrong.
- Size: width 19.5 x length 28 x height 22 cm