Rotary screw air compressor PUMA XM-2550 Tank capacity 50L. 3 HP

        Rotary screw air compressor PUMA XM-2550 

Tank size 50 L. Motor rpm 2,850 rpm
It is an air pump that is suitable for outdoor use as well. Made of durable material There are two wheels for easy movement, even with some noise. But the advantage is that the air pump is very fast. It is the most popular model that contractors use the most.

        Features of PUMA rotary air compressor model XM-2550

- Versatile use with wind equipment
- Suitable for general industries such as paint work, wood work, furniture work and car garage work, etc.
- Durable material used can be moved easily
- Warning : Before starting to maintain the air pump Make sure the air pump is switched off and disconnected every time.

       Usage

- Check the engine oil to the level in the middle of the photocell. If the engine oil is too low may damage the piston.
- Always drain the water before use. If the water is not taken Water will come out during the operation of the air pump.

Use with spray guns - Continuous use of this model provides a constant pressure of 2 bar, not enough for spray gun applications. but can adjust the wind power to lighten and then spray or if not pressed to spray paint soak Will have a pressure of 3-4 bar, which is enough to use paint guns that require only 3 bar pressure. If continuous use should not exceed 2-3 hours, rest 15-20 minutes in a cold machine. then keep working Because if forced to use will cause the motor or piston to have a reduced service life.
For use with nail guns or mags - Usable from f30 to st64, and 2-3 can be deployed in f30 mags.
Air Block Operation - Can be used with 1/2 size (4 hunk) blocks if firing at intervals. cannot be used continuously Because the air block requires a pressure of 6 bar or more if firing continuously. This will cause insufficient pressure and not strong wind block. But enough for a job in a small garage for sure.

         Procedure for use and maintenance of PUMA air pump model XM-2550

1. Check the air pump to be in normal condition, ready to use and not damaged. according to the instruction manual before every use
2. Wear head protection and safety glasses while using.
3. Do not touch the motor body and the piston area of ​​the air pump while the machine is working.
4. Drain water under the tank every time before and after use to prevent corrosion of the air tank.
5. Clean/replace (if tearing) the air filter before using the air pump.
6. Do not modify the air pump or use it incorrectly to cause damage to the machine.
7. This air compressor is not suitable for use with dental instruments.

        What you should check when receiving the PUMA XM-2550 air pump

- Is it the model that meets your needs or not?
- Please check whether the equipment is complete or not.
- air pump damaged Or is it warped during transportation?
- In the event that the initial Please contact the dealer you purchased from.

        Installation location of air compressor/air pump PUMA XM-2550

- The place is wide that can be disassembled and inspected. The air pump should not be placed next to the wall. There should be a distance of about 15 centimeters.
- Suitable place should have less humidity, less dust, never too much area. and is a place where the air can be ventilated easily
- There is a suitable light for easy checking of oil.

        1 set contains

1 x Air pump
2 x Trolley wheels
1 x Nut set
1 x Rubber base
1 x Air filter