HOME / POWER TOOLS / Drills, Screwdrivers & Impact Wrenches / Electric drills /

Hammer Drill MAKITA HP2050

Name: Hammer Drill MAKITA HP2050
Brand: MAKITA
SKU: 26-HP2050
Price: 4320.00 THB
Availability: InStock

Brand : MAKITA

Warranty2 years

26-HP2050

4,320 Baht

Buy genuine spare parts here

SKU 26-HP2050 ⧉

In stock

Out of stock

Price 4,320 Baht
(VAT included)

Weight : 3.0 kg

Buy via

Reserve via

Ask about restock or get notified via LINE

EAN
Brand country: Japan
Weight: 3.0 kg
Manufacturer warranty: 2 yearsaccessories excludedTerms

Hammer Drill MAKITA HP2050 size 20mm. power 720W. Made in Japan

Ships in 1-3 days
Same Day · Bangkok area
Spare parts

SKU 26-HP2050
Estimated Delivery 1-3 days to ThailandShips
Shipping Rate calculated
Returns product within 7 days
Cash on delivery

Trust Site 100% safe and secure
- You can request a refund immediately.
- Request a refund if the product is not as specified.
- Products sent with track and warranty for every piece

Price {{xAttr.product_price | number : fractionSize }} THB

Customers Also Viewed

MAKITA E-02995 Textile Socket Storage Case

440 THB

Fan shirt cordless MAKITA DFJ206Z (12V./ 18V.) (available in sizes M, L, XL) solo

3,940 THB

MAKITA 134874-8 1/2" Square Drive Socket Extension Bar 100 mm

1,130 THB

MAKITA D-21733 Bi-Metal Hole Saw 51 mm (2")

250 THB

MAKITA 792691-8 B-Type No.B-10S Jigsaw Blades 90 mm 13 TPI for Wood and Laminate (Pack of 5)

300 THB

MAKITA A-80400 B-Type No.B-29 Jigsaw Blades 77 mm 16 TPI (Pack of 5) for Curve Cutting Wood & Thick Plastic

330 THB

Relate Product

Assortment Drill Bit set MAKITA D-08660 / D16405 Set of 9 Drill Bits

400 THB

Screwdriver Bits MAKITA D-31740 size 2 X 65 mm.

390 THB

Magnetic driver Bit AKITA B-30483

300 THB

flexible shaft screwdriver connector included 10 screwdriver bits

190 THB

MAKITA Carbon Brush CB-419A

90 THB

Specifications
Power Rating	720w.
Impact Rate	Hi :58,000 Lo : 24,000 bpm
สามารถในการเจาะปูน	20 mm
สามารถในการเจาะเหล็ก	Hi 8 มม.(เหล็กเหนียว) /Lo 13 มม. (เหล็กธรรมดา)
สามารถในการเจาะไม้	Hi 25 มม.(ไม้เนื้อเเข็ง) /Lo 40 มม.(ไม้เนื้ออ่อน)
Weight	Weight 2.5 kg
No-Load Speed	1200-2900 rpm

Hammer Drill MAKITA HP2050 use with Carbon Brush CB419A

size 20mm. power 720W. Made in Japan

Intended use MAKITA HP2050

The tool is intended for drilling in wood, metal and plastic

Power supplyMAKITA HP2050

The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated and can, therefore, also be used from sockets without earth wire.

Reversing switch action MAKITA HP2050

This tool has a reversing switch to change the direction of rotation. Move the reversing switch lever to the position (A side) for clockwise rotation or the position (B side) for counterclockwise rotation.

Installing or removing drill bit MAKITA HP2050

To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand. Place the chuck key in each of the three holes and tighten clockwise. Be sure to tighten all three chuck holes evenly.

To remove the bit, turn the chuck key counterclockwise in just one hole, then loosen the chuck by hand.
After using the chuck key, be sure to return to the original position.

For Drilling in wood

When drilling in wood, the best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece.

CAUTION

Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool.

There is a tremendous force exerted on the tool/bit at the time of hole break through. Hold the tool firmly and exert care when the bit begins to break through the workpiece.

A stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. However, the tool may back out abruptly if you do not hold it firmly.

Always secure small workpieces in a vise or similar hold-down device.

FEATURES MAKITA HP2050

- 2-mode operation "Rotation Only" and "Hammering with Rotation" for multiple applications

- Lock-on button for continuous use

- Ergonomic rubberized "Pistol-grip" for increased comfort on the job

- Positive stop mode selector prevents accidental mode disengagement