EN
ไทย
Customers Also Purchased
Electric drills It is the most widely used tool in professional work, general DIY projects, and routine home repairs. An electric drill can help you drill holes of various diameters in various patterns, including wood, metal, cement surfaces, etc., depending on the drill bit you use. By adding different accessories to an electric drill, you can also use it for sanding, driving and removing screws, or even cutting.
However, before working with an electric drill, you must first understand how the tool or equipment operates—especially the safety aspects when using these electric drills. With just a little knowledge of safety and how to work with an electric drill, you can extend the tool's lifespan and protect your own well-being. If you have ever used an electric drill at home, you already have some basic understanding of working with one. Nevertheless, we have electric drill safety tips to help you operate it efficiently. If you're ready, let's dive into this article!
Choose the right type of electric drill
The first step to successful drilling is selecting the proper size and type of electric drill and drill bit. Naturally, there are various types of drills, such as rotary drills, impact drills, etc.
Use the correct drill bit for every job
Make sure you use the right drill bit according to the task and material. Using the wrong drill bit will result in poor workmanship and require excessive effort. It can also cause damage to the electric drill over time.
Workwear and protective equipment
Always wear safety glasses to drill safely. A respirator is recommended to avoid inhaling dust generated during drilling. Gloves are a great and useful accessory if they fit your hands properly. Therefore, try to choose the right glove size to protect your hands from harm.
Check the drill chuck
Before starting to drill, make sure the drill bit operates securely and smoothly inside the chuck. If the chuck is loose, the drill bit will not spin. To tighten the chuck, first insert the drill bit into the chuck, then tighten the chuck until you hear a few clicks. After that, turn the chuck back until you hear and feel a single click. Once you hear that final click, the bit is securely locked in place.
Turn off the drill before changing drill bits
After every drilling task, switch off the tool and unplug the power cord. Never change Drill Bit when the power cord is still connected to the power source. If you accidentally press the power switch, you could get injured. A safety lock should be engaged when the drill is not in use; most electric drills feature this safety mechanism.
Do not apply excessive pressure on the drill
Most of the drilling work should be done by the motor itself. Applying too much force can cause the drill to slip or damage the motor. Therefore, it is important to adjust the drill speed and the amount of pressure you apply depending on the material you are working with. For instance, when making rough holes in woodwork, you can use higher speeds and pressure, but pushing too hard can increase the risk of tear-out. When starting a hole in wood, try to slow down slightly and keep it as straight as possible to reduce the risk of splintering.
Dress appropriately
Wearing jewelry, scarves, and loose, long-sleeved clothing is dangerous when working with an electric drill. The motion of the drill can catch and pull dangling items, leading to hazardous situations. Therefore, when drilling, wear a sturdy jacket to protect yourself while operating an electric drill. Avoid long clothing that could get tangled in the work surface, avoid jewelry, and keep long hair secured out of the way.
Mark the drilling spot
On various surfaces, an electric drill may slip during use. It is best to use a nail to punch the working surface first to create a mark, then make a pilot hole with a smaller drill bit before drilling with the primary bit. This technique will help you drill straight and make clean-up easier. When working with tiles, you can stick paper or tape over the target spot to prevent the drill bit from slipping.
Avoid Drill Clogging
Drill bits can become clogged with wood dust or jammed with chips and debris when drilling into metal. To avoid this problem, withdraw the drill bit when you feel resistance or an obstruction. Clear away the debris before continuing to work. If your electric drill has a reverse rotation feature, handling these situations will be much easier.
Select Types of Electric Drills to suit your usage